It is necessary for people suffering from sleep apnea to use a CPAP device for a peaceful and uninterrupted sleep. Regular use of a CPAP can help treat this disorder. However, it is equally to keep the CPAP equipment clean and sanitized. Humid conditions in the tube, mask and other components can lead to the formation of molds and germs. Using a VirtuCLEAN 2.0 CPAP cleaner can help in keeping the device hygienic and disinfected.
Save now on the Purify O3 by using the “CLEAN” code during checkout
Buy the Virtuclean 2.0 CPAP Cleaner
What is VirtuCLEAN 2.0 CPAP Cleaner?
VirtuCLEAN 2.0 is a CPAP cleaning and sanitizing device that uses activated oxygen (ozone) to kill bacteria and germs. This keeps the CPAP components clean and safe for use, in a mere 30 minutes.
The best thing about this particular CPAP cleaner is that it does not use detergent or water for cleaning. The use of water and detergent can leave moisture inside the tube and mask that becomes a perfect breeding ground for bacteria and germs. In this article, we will discuss how to install VirtuCLEAN 2.0 and use it to disinfect CPAP equipment easily.
How to Install VirtuCLEAN 2.0 CPAP Cleaner?
VirtuCLEAN 2.0 consists of the device, a bag, and a charger with a USB cable. To use it for the sanitization of CPAP components, you will have to install the device and make it ready for cleaning.
The installation of the device is quite simple. It is best to fully charge the device before you start the cleaning process. Follow the steps mentioned below to charge the device:
- When the battery is low, a battery icon with red exclamation appears on the screen with “Recharge” written below it.
- Connect the USB cable to the charger and the device and plug into the power source.
- While charging, the battery icon turns yellow with the word “Charging” below it.
- When charged, the battery icon turns green with “Full” written below it. Your Virtuclean 2.0 is now ready to sanitize your CPAP device.
- It is recommended to charge the lithium battery in the power-off mode for the best battery life and performance.
- You should also ensure that the battery is charged enough for the cleaning process to complete.
Once fully charged, you can use the VirtuCLEAN 2.0 for the disinfection process.
How to Use VirtuCLEAN 2.0 CPAP Cleaner?
Let us find out how we can use the device effectively for standard or heated tubing CPAP machine:
Step 1: Disconnect your tubing and mask from the CPAP machine.
Step 2: Put the mask in the VirtuCLEAN 2.0 bag.
Step 3: Remove the humidifier chamber from your CPAP machine, empty water from it and put it in the VirtuCLEAN 2.0 bag.
Step 4: Zip close the bag and check that the zipper is fully closed.
Step 5: Connect one end of the CPAP tubing with the bag and the other end with the VirtuCLEAN 2.0 device.
Step 6: Now, press the power button on the device to switch it on. The device will display a few details such as the battery remaining, the number of times the device was used for cleaning in the past week, etc.
Step 7: Once the cleaning process starts, the device displays the time remaining for the cleaning process to complete.
Step 8: It takes about 35 minutes in total for the device to clean your CPAP components. During the first 30 minutes, the device uses activated oxygen for the cleaning process. The last five minutes of the sanitization cycle takes place using the fresh air to ward off excess ozone remaining in the system.
Once the sanitization is complete, remove the mask and the tube and reattach them to the CPAP device. Fill the humidifier with distilled water and place it back in the CPAP equipment.
Important Points Related to VirtuCLEAN 2.0 CPAP Cleaner
Once you have installed and used the VirtuCLEAN 2.0 device for cleaning, you can start using the CPAP for a peaceful night’s sleep. However, you should keep the following points in mind while using your CPAP equipment:
- You may want to wait for another 45 minutes after the cleaning process ends for ozone’s odor to dispel from the tube, mask, and humidifier.
- You should clean the mask and tube daily and the humidifier weekly.
- Ozone (activated oxygen) can cause irritation to the breathing passage in many individuals. You should stay away from the device while cleaning is under process.
- If you suffer from respiratory issues such as asthma, cold, flu, bronchitis, and others, contact your doctor before using a CPAP cleaner that uses ozone technology.
- Keep your device away from open flame, heat, sparks, etc. while the cleaning process is underway. Ozone can accelerate combustion.
Save now on the Purify O3 by using the “CLEAN” code during checkout
Buy the Virtuclean 2.0 CPAP Cleaner
Conclusion
Using the VirtuCLEAN 2.0 device will help you avoid the harmful bacteria and mold common to CPAP devices. Use it regularly to clean your CPAP components for the best results. Click here to learn more about the Virtuclean 2.0.
Share on facebook
Share on twitter
Share on email
Share on google
- Cleaning
- Guide
- How-to
- Mould and bacteria
- Respiratory health
- Virtueclean
- Virtueclean 2.0