CPAP Cleaner Comparison: A Comprehensive Review (Updated for 2023)

Many sleep apnea patients who use CPAP therapy have a difficult time choosing a CPAP machine cleaner. Choosing the best CPAP cleaner for your machine can be a challenging task due to the balancing act between your needs, what’s available, and what you can afford. Most CPAP cleaning device comparisons are difficult because too much unreferenced and contradictory information is scattered around online. Adding to the confusion is the new information that enters the market every week which is not always as helpful as we would like! It is because of this that choosing the right CPAP cleaner to buy is quite a hassle – but it doesn’t have to be! understands this challenge, and our team is dedicated to helping sleep apnea patients find the perfect device with this comprehensive comparison. With the help of this review, you will be able to make a more informed decision about your CPAP cleaning device for your CPAP machine, so you will not have to lose any sleep over it. This CPAP machine cleaner comparison details the fine and not-so-fine features of the best CPAP cleaners available in categories that can be helpful to you in your search. Find out which CPAP cleaning device is best in 2023 by reading on!

Looking for a quick fix?

Review the side-by-side CPAP cleaner comparison chart or select an individual CPAP cleaning device from the menu below to purchase or learn more

Ozone CPAP Cleaners

UV CPAP Cleaners

Our 2023 CPAP Cleaner Comparison: How It’s Organized

We have divided our CPAP cleaner comparison into two broad categories based on their sanitizing technologies: ozone (also called activated oxygen or O3) and UV-C light. Additionally, in this comparison, each cleaning device is rated based on some logistical criteria that have a significant impact on the lives of CPAP users. Among them are ease of use, safety, portability, versatility, price, and the availability of insurance. We also add our seal of approval on the best of the best.

Eight CPAP cleaning machines in this CPAP cleaner comparison utilize ozone/activated oxygen-based technology, and two utilize UV-C lightwave technology (and its related devices). CPAP cleaners based on O3 technology include the VirtuCLEAN 2.0, the Sleep8, the Purify 03, the Purify O3 Elite Series, the SoClean, the PAP Clean, the NUWAVE, and the Zoey. On this list, the LiViliti Paptizer and the Lumin CPAP sanitizing device use UV-C rays.

A comparison of CPAP cleaners must also take into account portability and functionality for home or travel use for busy sleep apnea patients. It is determined by its size, shape, and weight whether or not a machine is portable. It is important that CPAP cleaning machines give you some relief in this regard if you plan on traveling since CPAP machines themselves already carry their own weight and size.

Older CPAP sanitizers were bulky and big, making them only suitable for home use. It would be a nightmare to travel with these heavy behemoths in your luggage, as they are large, heavy, and come with a multitude of accessories. The idea of hauling these machines around is not as appealing if you want to travel light or are a spontaneous traveler who loves to hit the road on short notice. The newer models of CPAP cleaners have improved considerably in terms of both size and weight as a result of continuous technological advancements. As a frequent traveler, your CPAP cleaner is also more likely to be damaged with each trip, so you will appreciate a lengthy warranty period.

The comparison will begin with a detailed comparison of the technologies: ozone and UV light. It is essential to understand this when choosing your CPAP cleaner. The comparison will then be followed by an ozone-based and UV-based CPAP cleaning device comparison.

Comparing CPAP Cleaners Using Ozone vs. UV Light

UV and ozone are both excellent sanitizers. How does one compare to the other? Learn how CPAP cleaners based on activated oxygen and UV light-based technologies work, followed by a detailed comparison of CPAP cleaners.

What is ozone?

Ozone is a colorless gas that contains three oxygen atoms per molecule (O3), also called activated oxygen. A layer of it exists in the lower stratosphere. By absorbing ultraviolet radiation from the sun, atmospheric ozone protects life on earth from harmful ultraviolet radiation. Activated oxygen was first used for water treatment in the late 1800s. A number of industries have used it since then, including the medical equipment industry and the food industry, for sanitization and sterilization.

Why is ozone or activated oxygen technology used in CPAP cleaners?

There are CPAP cleaners available on the market that use UV-C rays to eliminate all harmful microbes from your CPAP, similar to what O3 does. It is important to note that UV-C technology can only sanitize surfaces of your CPAP mask and other components that it comes into contact with, which is a disadvantage for our comprehensive CPAP cleaner comparison. The solution to this can be found later, but let’s take a closer look at the power of activated oxygen first.

The ability of activated oxygen to eliminate 99.9% of microbial life makes it a more effective CPAP cleaning device than other technologies. Apart from its effective sanitization abilities, this gas also reaches the farthest, trickiest, and most remote corners inside your CPAP equipment, eliminating the most difficult microbes. In order to assess the effectiveness and safety of your CPAP cleaner, you must understand the role of activated oxygen.

In nature, ozone gas is a highly reactive oxidant as it is one of the most potent oxidants. As a result of its ability to react with almost anything, activated oxygen destroys most types of microbial life very efficiently. Upon exposure to O3, bacteria lose their ability to maintain their cell envelope integrity. In addition, it disrupts the reproductive cycle of viruses and inhibits the cell growth of fungi.

Ozone is produced on-site and on-demand when humans use it as a sanitation tool. Due to its rapid decay into diatomic oxygen, it cannot be stored or transported. Ozone is most commonly produced by sending an extremely high voltage current through air containing diatomic oxygen (O2). As a result, the bond between the two oxygen atoms in O2 breaks, releasing two individual oxygen atoms (O). Once this charged and free oxygen atom is attached to the diatomic oxygen molecule (O2), it forms ozone (03). In UV-based generators, high voltage current can also be replaced with UV light to obtain the same result.

Activated oxygen-based CPAP cleaners have a compact size since O3 doesn’t have to be stored. CPAP cleaners become smaller and lighter as there is no additional container with this gas attached.

It is important to note that ozone-based CPAP cleaners can only eliminate living microorganisms, such as bacteria, mold, and viruses. Your CPAP components may contain dirt, debris, and other non-living particles that are not removed by activated oxygen technology. CPAP parts need to be cleaned of dirt and debris before sanitizing. Cleaning CPAP components can be done with customized CPAP wipes. [Link to mask wipes and spray section in shop] It is also possible to give your CPAP mask and parts a gentle pre-wash, followed by a dry wipe before you sanitize them.

It is possible for your health to be adversely affected by long-term exposure to O3. An average concentration of more than 0.10 ppm for 8 hours can be hazardous to humans, according to the Occupational Safety and Health Administration (OSHA).

There are a number of side effects associated with activated oxygen exposure depending on the level of exposure. Breathing difficulties, coughing, sore throats, inflammation of airways, an increase in asthma attacks, aggravation of lung diseases, and a greater risk of infections in the lungs are just a few.

To protect the users from these ill effects of activated oxygen exposure, CPAP cleaners that use activated oxygen for sanitization must ensure a mechanism that protects users from the ill effects of O3 exposure. Our CPAP cleaner comparison includes venting and other release methods to rid your device of any remaining ozone, so you won’t breathe it in.

What is UV-C radiation?

The sun’s UV-C radiation has the highest energy of all types of ultraviolet radiation. As it is absorbed by the ozone layer, it does not reach the surface of our planet. Living organisms are extremely vulnerable to UV-C radiation. Injuries to the eyes and skin can result from exposure to UV-C radiation. Due to the extremely high temperatures on the surface of the sun, UV-C radiation is produced. Semiconductors produce UV-C light in medical equipment and machines.

Why is UV-C light technology used in CPAP cleaners?

UV-C radiation is highly effective at eliminating microbial life. This technology is a popular one in the medical equipment industry because it ensures perfect sterilization in a controlled environment. A significant limitation of UV-C technology in this CPAP cleaning device comparison is that it only sterilizes surfaces it comes into contact with, so additional cleaning cycles are required to sterilize intricate tubing and hoses. It is harmful to come into direct contact with UV-C radiation, as it is with O3 technology.

The Benefits of Ozone-Based CPAP Cleaners: Sanitization, Safety, and Speed

By using ozone technology, these cleaners sterilize CPAP machine components. Among them are:

The Sleep8 CPAP sanitizer is our top pick for the best ozone-based CPAP cleaner. For a complete analysis, continue reading.

NUWAVE CPAP Sanitizer Combo: Your Home and Travel Partner

The NUWAVE Combo is a revolutionary product that brings together the best of both worlds. Not only can you get the convenience and practicality of a sizeable sanitizing chamber for your CPAP mask and water chamber, but you also receive a smaller chamber in the same package—perfect for traveling. Both chambers incorporate a unique patent-pending flange fitting which makes using them comfortable and easy, especially for sleep apnea patients with joint pain or arthritis. And since both chambers help contain the O3 and are highly efficient at killing bacteria (up to 99.9%), you don’t have to worry about breathing in any residual 03 after completing your cycle – an ozone filter is even provided to help turn it back into oxygen!

FSA/HSA approved with the listing number 9274

Quick Facts

NUWAVE CPAP Sanitizer Combo Details

The NUWAVE CPAP Sanitizer Combo includes the following components:

  1. NUWAVE Sanitizing Chamber (two sizes: big and small)
  2. NUWAVE Generator
  3. NUWAVE charging and USB power cord
  4. NUWAVE Activated Carbon Filter

With NUWAVE, there’s no concern about your CPAP device harboring any pathogens; in just 30 minutes, 99.9% of all contaminants are destroyed. Due to the innovative cleaning cycle and activated oxygen-based system, no excess ozone is ever discharged. Moreover, once the cycle is completed, you can be assured that the air in your home won’t be compromised with O3 as NUWAVE emits five minutes of fresh air via its fan operation alone which helps convert the ozone back to breathable oxygen. Not only are you ensuring a safer environment for yourself when using your CPAP device, but you’ll also have the peace of mind from knowing that your health is a top priority with this advanced cleaning system.

Setting up the NUWAVE CPAP Sanitizer is quick and straightforward. All you have to do is connect one end of your CPAP tube to the ozone generator and the other end to the external sanitizing chamber’s adapter fitting. CPAP parts that need sanitizing go into a correctly-sized bagging system, after which you just close it up and turn on the power button. You won’t need to worry about a lengthy set-up routine or complicated programming process either. Once you experience how easy it works, you’ll be so glad that you have this piece of equipment that can help keep your components disinfected and germ-free with no fuss.

To ensure the best and safest possible sanitization of your CPAP components, take a few steps to prepare the NUWAVE sanitization chamber. Place your mask, headgear, water chamber, and other CPAP components into the NUWAVE sanitization chamber. To help maximize cleanliness, make sure your water chamber is empty and dry before placing it in the NUWAVE chamber. Once everything is inside the bag, zip the NUWAVE sanitization chamber closed as tightly as possible. This will help minimize any O3 which could seep out into your environment during the cleaning process.


Running your NUWAVE CPAP sanitization system is simple. Just press and hold the ON button for around two seconds, and you’ll hear a beep and see the blue “on” light indicator come on. Once the light is illuminated, the NUWAVE will start its sanitization cycle automatically. It will power down when finished, so there’s no worries about remembering to turn it off! If you want to end the cycle at any point, just press and hold the power button for around two seconds until you hear a two-second beep indicating that it has shut off.

NUWAVE’s sanitizing and disinfecting cycle is designed to run a complete 30-minute cycle. After it’s done, the unit will switch to its 5-minute fresh air flush cycle that helps convert the ozone into oxygen. To make sure your household is properly protected, it’s important to remember to keep NUWAVE closed up for 2 hours after the cleaning cycle is complete. This way you can be sure that you don’t come in contact with any amount of ozone.

Operating your NUWAVE for the first time should be as stress-free as possible. That’s why it comes with a partial battery charge and a USB power cord. All you have to do is plug in your NUWAVE using the micro-USB port and leave it charging for four hours – or until the green light turns off. The long-life lithium-ion battery allows the device to run smoothly and reliably for up to 2 weeks, depending on usage, for 3-4 sanitization cycles per week. Iit should last up to 6-8 cycles when fully charged.

Low battery mode: When the battery is dead, and your device won’t power on, don’t panic! Just press the power button for two seconds, and you will hear three beeps followed by a red light that will indicate that you need to recharge. Just plug in the power cord, and when you see a green light your device is ready to operate again.

Replacing the activated carbon filter in your NUWAVE CPAP Sanitizing device every 6 months is an important part of the maintenance process for achieving maximum effectiveness and best performance. To replace the filter, simply remove the new filter from the plastic bag and take off the white labels from the top and bottom. Once ready, place it inside your sanitizing chamber side pouch. It’s really that easy!

The NUWAVE does not have a screen. On the device, there is an On/Off button to start and stop the device. There is a charging indicator that is on when the device is charging. A glowing indicator remains on while the device is in use.

The NUWAVE is a great device for portability and convenience. Its small size of 4.87 x 2.37 x 2 inches allows it to fit easily in your hand, and its lightweight design – weighing less than half a pound – adds to the ease of travel or storage. Its stylish cuboid shape fits in with most other items, while its padded and flexible foldable sanitizing bag gives you the freedom to sanitize all your CPAP components, with an additional smaller travel-friendly bag. To top it off, the NUWAVE works with a rechargeable lithium-ion battery and O3 generator with a two year warranty, and a 12 month warranty on the sanitizing chamber, ensuring you never have to worry about sanitization on the go!

The NUWAVE CPAP combo bundle is designed to do it all – no matter what kind of CPAP equipment, masks, tubing, headgear or humidifier chamber you have, it will work perfectly. It’s hassle free too – no need to worry about connectors or adapters. The NUWAVE is designed to accommodate any APAP, BiPAP or CPAP.

The NUWAVE CPAP Sanitizer is normally $329, but you can find it here at the shop for just $219. Plus, when you join our newsletter you’ll get an additional 10% off! 

It’s always a good idea to read reviews before investing in a product like this in order to make the best choice for you before you shop. You can find customer reviews of NUVAWE here.

VirtuCLEAN 2.0: Travel-Friendly Activated Oxygen-Tech with a Well-Rounded Design

VirtuCLEAN 2.0 is a portable, lightweight, and small CPAP cleaner. It kills 99.9% of all germs and bacteria found in CPAP mask, humidifier, and tubing equipment by using ozone. It is possible for germs, bacteria, and mold to develop inside CPAP equipment if it is not cleaned regularly. With VirtuCLEAN 2.0, you can sleep easy knowing that your mask and other components are completely disinfected!

FSA/HSA approved with the listing number 9274

Quick Facts

VirtuClean 2.0 CPAP Cleaner Details

In the VirtuCLEAN 2.0 CPAP cleaner kit, you will find the following components:

  1. VirtuCLEAN 2.0 device
  2. VirtuCLEAN 2.0 bag
  3. VirtuCLEAN 2.0 filter
  4. VirtuCLEAN 2.0 heated tubing adapter

With O3 technology, the VirtuCLEAN 2.0 CPAP cleaner is able to kill 99.9% of bacteria, viruses, and mold. By refining the previous VirtuCLEAN model, the sanitization bag that comes with the VirtuCLEAN 2.0 CPAP cleaner incorporates a port that connects seamlessly with the CPAP tube, creating a closed circulation loop that prevents gas from dissipating. [link to product] Therefore, VirtuCLEAN 2.0 is suitable for any indoor environment. Any activated oxygen odor is also removed by a carbon filter. The sanitizing bag should be replaced annually for best results, and the filter should be changed every six months. New sanitization bags come with a filter as well, so you will only have to replace the bag.

It takes very little preparation to set up the VirtuCLEAN 2.0. All you need to do is gather the CPAP mask and other parts that need cleaning with the help of the sanitizing bag and the device.

It is extremely easy to use VirtuCLEAN 2.0. Simply press the power button to begin the sanitization process. Upon completion of the sanitizing process, the device automatically shuts down.

The CPAP machine should be disconnected from the mask, tubing, and humidifier chamber. Empty the water chamber of the CPAP machine. Remove any dirt and debris from your mask and other components with specialized products like a CPAP wipe or a soft cloth. Zip the sanitization bag closed after placing the water chamber and mask inside. You will then have to connect one end of your CPAP tubing to the bag and the other end to the VirtuCLEAN 2.0 device. Last but not least, hit the power button to start the cleaning process.

After completing a 35-minute sanitation cycle, the VirtuCLEAN 2.0 automatically shuts off. After sanitizing, wait 30 to 45 minutes to allow the O3 to convert back into oxygen before reassembling your CPAP device.

In the event that the VirtuCLEAN 2.0 is low on battery power, a battery-shaped icon with a red exclamation mark will display on the screen. Using the USB cable, connect the charger to the device and plug it into an electrical outlet. During charging, the battery icon will turn yellow and the word ‘CHARGING’ will appear under it. As soon as the battery is fully charged, the battery icon turns green with the word ‘FULL’ underneath. For the best battery life and performance, charge the battery when the device is turned off. Be sure to charge the battery sufficiently before using the device.

The VirtuCLEAN 2.0 comes with a filter that converts O3 into breathable oxygen. It is necessary to replace this filter every six months for best results. Replace a filter by inserting its long and slender end through the hole on top of the sanitization bag’s cover. Make sure you don’t insert it anywhere else on the bag or in any other way. It is recommended that the protection ring on the filter sits on top of the lid of the bag. After that, just remove the blue plastic cover, and your filter is ready.

The VirtuCLEAN 2.0 shows you a QR code when you turn it on for the first ten times, which you can use to register your device for warranty coverage. You will be able to know the number of total cleanings and total hours the cleaner has been used in the last seven days every time you turn on your device. As a result of this information, you can keep track of how consistently you are cleaning your CPAP mask and other equipment.

CPAP cleaning device comparison tip: if you are prone to forgetting to use your CPAP cleaner, the VirtuCLEAN 2.0 CPAP cleaner can save you from mold and other issues that you might face sooner or later. After seven consecutive days of not using the device, an alarm will sound. It is also possible to add personal preferences when set this alarm.

A refined version of the original VirtuCLEAN CPAP cleaner, VirtuCLEAN 2.0 offers more features. As compared to its previous model, the perfectly round VirtuCLEAN 2.0 CPAP cleaner measures 4.5 x 1.7 inches and weighs just 0.48 lbs. The machine is light and quiet in operation. In terms of portability, VirtuCLEAN 2.0 is extremely easy to carry due to its convenient and futuristic design. Additionally, the large bag can easily house and sanitize all your CPAP components in one go. It is powered by a lithium-ion rechargeable battery and is covered by a 24-month warranty.

The VirtuCLEAN 2.0 is compatible with almost any CPAP battery, and is easy fit into a backpack for camping season. 

CPAP machines of all kinds are compatible with VirtuCLEAN 2.0. The kit includes a heated tube adapter. With this adapter, you can ensure that the tubing always fits securely.

In comparison to its predecessor, VirtuCLEAN 2.0 is more expensive. It is normally $329.00, but you may be able to find the VirtuCLEAN 2.0 on sale with an additional 10% OFF by joining the mailing list for the shop. VirtuCLEAN 2.0 is a qualified expense for Flexible Spending Accounts (FSAs) and Health Savings Accounts (HSAs).

If you want to be sure you make the right choice before you add the VirtuCLEAN 2.0 to your cart, it is always best to read reviews first. VirtuCLEAN 2.0 customer reviews are available here.

The Purify 03 CPAP Sanitizer: Low Maintenance Versatility at Its Best

You can disinfect your CPAP equipment and supplies easily and effectively with Purify O3. Purify O3 is a simple one-touch solution that uses activated oxygen technology to sanitize areas of CPAP equipment not reachable by cleansing wipes or UV waves. The automatic shut-off feature makes it worry-free too! FSA/HSA approved with the listing number 9274
Quick Facts

Purify O3 CPAP Sanitizer Details

Here are the components of the Purify 03 CPAP Sanitizer kit:

  1. Purify 03 sanitizer unit with rechargeable battery
  2. USB cable and charging adapter
  3. Tubing adapter
  4. Dual purpose sanitizing/travel case

The Purify 03 eliminates 99.99% of the harmful microbes found within your CPAP mask and other components using activated oxygen. During the sanitization process, keep the bag in an empty room to protect yourself and your family from breathing dissipating O3. Alternatively, you can sanitize outside in the open.

It is easy to set up the Purify 03. Using your CPAP hose, you connect the device and the bag. After putting your CPAP components inside the bag, close it, and turn on the power.

In order to use the Purify 03, you will need to disconnect your mask and all the equipment from your CPAP machine. Make sure your CPAP humidifier’s water chamber is empty of any remaining water. Afterward, wipe down your CPAP mask, tubing, and humidifier water chamber with CPAP wipes or a soft cloth. Any dirt or oil film that may be present on the equipment surfaces will be removed by performing this procedure.

Start by connecting the CPAP tubing to the Purify 03. In the sanitization bag, place the mask and nasal pillow connected to the Purify 03 unit. Turn the Purify 03 CPAP sanitizing machine on by pressing and holding the On/Off button for 3 seconds. As soon as the device begins the cleaning process, you will hear a beep, which indicates the flow of ozone has begun. The bag can now be sealed shut, and you can begin sanitizing.

In order to clean your CPAP water chamber, place both the chamber and the device inside the sanitization bag. To turn the device on, press and hold the On/Off button for 3 seconds. Upon streaming of ozone, the unit will emit a single beep. Zip up the bag quickly. As you do so, be sure not to inhale any O3.

You can buy a 12-quart plastic bin with a secure fitting lid if you want to sanitize your mask and all your other equipment at once. Turn on the Purify 03, place all the components in the bin, and close the lid.

After the sanitizing cycle is complete, the unit will beep five times and automatically shut off. The On/Off button can be pressed and held for three seconds if you want to stop the sanitizing cycle while the device is active. For the O3 to completely dissipate, allow the equipment to sit for 90 minutes after switching it off.

It takes 35 minutes for the Purify 03 CPAP Sanitizing device to complete the sanitization process. Allow the Purify 03, your mask, and other components to rest for 90-120 minutes after the process is complete to allow the ozone to convert into oxygen. There are serious side effects associated with inhaling ozone gas, so waiting time is important.

A rechargeable lithium-ion battery powers the Purify 03. Keeping the device fully charged before use is recommended for the best and most efficient sanitizing. You can also extend the battery life of your device by turning it off while it is charging. Connect the charging cable to the charging adapter, then connect the charging cable to the USB port on the side of the Purify 03 to charge it. Connect the charging adapter to an electrical socket to begin charging. In general, the device takes 2 to 3 hours to charge. You will be alerted if the device is low on battery by a long buzzing noise and rapid blinking of the green in-use indicator.

The Purify 03 does not utilize any filters. In terms of a CPAP cleaning device comparison, this is a very negative factor if you live in a small apartment or house. However, it also means that the device does not require new filters, which is a cost savings. If sanitizing can be performed in an area away from people, this less complicated sanitizing system could work well for you.

There is no screen on the Purify 03. The device can be started and stopped with the On/Off button. An indicator indicates that the device is charging when it is on. During use, the device’s glowing indicator stays on.

Physically, the Purify 03 measures 4.5 x 2.75 x 2.12 inches and weighs half a pound. With its compact, rounded, and rectangular shape, the Purify 03 fits very snugly into your luggage. Its disadvantage is that it comes with a small bag. If you do not purchase a separate plastic container, as mentioned above, you will have to sanitize your CPAP components separately, since they cannot all fit in the sanitization bag at the same time. The time you spend sanitizing every component can double if you do it every day, making it a tedious process, especially on trips. Also, you’ll want a location to safely complete sanitation when traveling, so that no one will breathe in the ozone. Keep these considerations in mind before you add the Purify 03 to your CPAP cleansing routine as it may not be best for everyone. The Purify 03 uses a lithium-ion rechargeable battery and is the warranty lasts for two years.

The Purify 03 was designed with universal compatibility in mind. All types of CPAP machines and products can be used with it. CPAP masks, water chambers, and tubing of any type can be cleaned with it.

On this CPAP cleaner comparison, the Purify 03 is one of the most economically priced products. By joining the newsletter, you can purchase it for $169 and get a discount code to save an additional 10% off the regular price of $279.00 at the shop. Commercial medical insurance does not cover the Purify 03, but it is eligible for HSA/FSA reimbursement so be sure to apply any of these qualified funds to get the best deal.

Do you want to know what users think of the Purify 03? Check out these product reviews before you shop.

A CPAP Cleaner with Intuition: The Purify 03 Elite

As the next generation of Responsive Respiratory’s sleep therapy equipment cleaning and sanitizing machines, the Purify O3 Elite represents a significant advancement. With touch-to-activate controls and a lighted battery life indicator, the Elite Series provides CPAP users with visual feedback and disinfection progress tracking. With a single cleaning cycle, the FDA-registered Purify O3 Elite kills 99.99% of germs and bacteria. As well as being lightweight and compact, it also sanitizes and stores in its own case.

FSA/HSA approved with the listing number 9274

Quick Facts

Purify O3 Elite CPAP Cleaner Details

In the Purify 03 Elite CPAP cleaner kit, you will find the following components:

  1. Purify 03 Elite sanitizer with rechargeable battery
  2. USB cable and charging adapter
  3. Tubing adapter
  4. Dual-purpose sanitizing/travel case

With the Purify 03 Elite CPAP cleaner, you can eliminate 99.99% of harmful microorganisms found in your CPAP components. Consider that the Purify 03 Elite is an upgraded version of the previous model if you want to make an effective CPAP cleaner comparison. The new, more intuitive version utilizes the same ozone technology as the Purify 03 CPAP Sanitizing device to perform sanitizing and deodorizing. Sanitizing in a well-ventilated area, preferably in the open or an empty room is recommended, as breathing in ozone can be harmful.

The setup of the Purify 03 Elite CPAP Cleaner is straightforward. You need only remove any components that need to be cleaned from your CPAP machine and place them inside the sanitization bag. Place your finger on the On/Off touch sensor for two seconds to activate the device. Once the device is placed inside the sanitization bag, zip it up all the way, and the sanitization will take place.

Connect the CPAP tubing to the mask on one end and to the Purify 03 Elite Cleaning device on the other end to sanitize the CPAP mask/nasal pillows. For the sanitization process to begin, press and hold the On/Off touch sensor for two seconds. In the sanitization bag, place the device and its attachments, zip it fully, and wait until the device is done sanitizing. Once the process is complete, the device will beep once and turn off. About 35 minutes are required for sanitizing. Perform the procedure in an open area or empty room to avoid breathing in O3 gas.

Ensure that the humidification chamber of your CPAP machine is empty of all water before cleaning it. If your humidification chamber is large, you may need a larger container or bag. You may use an air-tight container with a medium capacity (around 12 quarts). The chamber should be placed inside the bag or box. To activate the Purify 03 Elite, hold the On/Off Touch Sensor for 3 seconds. An alert will sound when the Purify 03 Elite is powered on, and the Disinfection Progress Ring will illuminate along with a Battery Life Indicator to estimate the remaining battery life. The Purify 03 Elite should be placed in the container, and the bag/box should be closed completely. A beep will be heard once the cleaning is complete, and the device will shut down. For the residual ozone to dissipate into the environment, you should leave the bag/box closed for an additional 90 minutes. It is also recommended that you sanitize your humidification chamber weekly with the Purify 03 Elite CPAP Cleaner.

All the components of your CPAP machine can be cleaned at once using the Purify 03 Elite CPAP Cleaning device. You only need a large box with an airtight lid to place everything into. After everything is ready, press the power button and close the airtight lid.

The Purify 03 Elite takes 35 minutes to finish the sanitization process. You should then leave the box or bag to rest for at least an hour and a half to allow the O3 gas to dissipate in the environment. Breathing in the ozone can have harmful effects on your health. To add more safety, you can perform sanitization in an open area or an empty room. As far as our CPAP cleaner comparison is concerned, the Purify 03 Elite takes about the average time that is taken by most CPAP cleaners. But while there are much faster CPAP cleaners on the list, if you want your CPAP cleaner comparison to be perfect, you need to understand that those CPAP cleaners cannot beat the Purify 03 Elite in many other things, especially efficiency and portability. Consider all the factors before you shop to make the best choice for you and hit add to cart.

Purify 03 Elite offers more advanced features and a better user interface than its predecessor. A full battery can last four to five cycles. An auditory and visual notification will be displayed when the battery is low. While the device is being used, the Battery Life Indicator will blink rapidly, and a long buzz will be heard. In this case, it will continue to run until the battery dies. It is recommended not to use the device while it is charging and to use it on a full battery.

In order to charge a device that is low on battery power, you need to connect the USB cable to the charging adapter and to the device’s charging port. Connect the adapter to an electrical outlet. During charging, the Battery Life Indicator will show blinking white lights, which will turn solid white when the Purify O3 Elite is fully charged. It takes two to three hours to charge the device fully. After being fully charged, if the device stops working, then the battery has possibly died and should be replaced.

A filter is not used with The Purify 03 Elite, as it was with its predecessor. Taking a few precautions can help you avoid accidentally breathing in O3. Sanitization should not be conducted in a tight or poorly ventilated area where people are present. Make sure there is no one in the room during the sanitization process, or perform it outside if possible.

There is no screen on the Purify 03 Elite. It features an intuitive On/Off touch sensor, as well as a Battery Life Indicator to notify you when the battery is running low. Additionally, it has a Sanitization Progress Indicator Ring to help you track sanitization progress.

Having dimensions of 5.75 x 2.5 x 1.5, the Purify 03 is a compact device. Weighing only 0.49 lbs, it is a very lightweight and small device. When you’re on the go, it fits easily into your luggage or handbag. Plus, it looks great with its compact shape and minimalist design!

In the same way as its predecessor, the Purify 03 Elite is exceptionally versatile. Water chambers, CPAP tubing, and masks of all types can be used with it.

Normally retailing for $219, the Purify 03 is a very affordable CPAP cleaner. At shop, you can purchase the Purify O3 Elite for $199, and you can save an additional 10% by joining the shop newsletter. CPAP/BiPAP sanitizing device Purify 03 Elite does not fall under insurance coverage since it is a non-prescription device. If you have HSA/FSA savings plans, you can still use them.

Would you like to read some comments from other Purify 03 Elite users about its performance? To help you decide which product is best for you before you shop, you can find reviews here.

The Zoey CPAP Sanitizer: Superior Safety Features

When you shop for your CPAP products, consider the Zoey, your new CPAP cleaning option that is easy to use and looks good too. The Zoey is a sleek and quiet CPAP cleaner with a minimalist aesthetic, simple operation, and soft lighting. Additionally, its small size and silent interface allows it to fit into any living space.

FSA/HSA approved with the listing number 9274

Quick Facts

Zoey Cpap Cleaner Details

Here are the components of the Zoey CPAP Sanitizer kit:

  1. Zoey main unit
  2. Injection tube with check valve
  3. Filter
  4. Tube connector
  5. Power adapter

In the same way, as other activated oxygen-based CPAP cleaners, Zoey kills 99% of pathogens within your CPAP machine. In order to thoroughly sanitize your CPAP mask and other CPAP equipment, Zoey uses just the right amount of ozone. The Zoey gradually decreases the amount of O3 at the end of the cleaning cycle, taking about two hours. The Zoey CPAP Sanitizing device dissipates ozone inside a closed circulation system. This prevents ozone from escaping into your home.

Additionally, the Zoey features built-in sensors near the CPAP tube connector. To trigger the sensors, you’ll need to ensure the CPAP tubing presses firmly against them. CPAP tubing that has not been connected correctly will not trigger the sensors, and the device will not begin cleaning. This prevents the device from releasing ozone into the air due to poor connections. There is no doubt that this is a great safety feature.

The Zoey CPAP Sanitizing device requires no set-up. Nevertheless, it has a tricky tube connection that may require some practice before you’re able to master it. The Zoey would lose points in your CPAP cleaner comparison if you have problems with finger dexterity.

Before beginning the sanitization process, disconnect the CPAP mask from the CPAP tubing. The lid of the Zoey’s sanitization compartment can be opened by pressing down on the press point until it clicks. You should place your CPAP mask inside the sanitization chamber, close the top, and press the press point until it clicks. You must then connect the Zoey’s tube input to the mask end of your CPAP tubing. Your CPAP machine will remain connected to the other end of the tubing. Connect the tube cuff firmly to the Zoey CPAP tube connector when connecting the tubing to the Zoey’s input port to ensure that the sensor is triggered. The cleaning cycle will not begin if the tubing is not properly connected to the sensor. To begin cleaning, press the power button when you are ready.

You can sanitize your CPAP components in twenty minutes using the Zoey CPAP Sanitizer. In order to convert the ozone back into pure breathable oxygen, the Zoey needs 1 hour and forty minutes after the cleaning cycle is completed.

Zoey CPAP Sanitizers do not use rechargeable batteries. You will need an electrical power supply to operate it. The power adapter cord should be plugged into Zoey’s power socket and connected to a wall outlet on the other end.

It is time to replace the filter and check valve on your Zoey if the screen shows three yellow lights. It is possible to perform 120 sanitization cycles with one filter and check valve set.

The sanitization chamber of Zoey needs to be opened in order to replace its filter. Put a new filter in place of the old one by removing the filter tab from the bottom corner. Reset your Zoey after replacing the filter. Press and hold the ‘Power’ and ‘Delay’ buttons simultaneously for three seconds until green lights appear. A 120-cycle timer will be restarted. The old filter can be disposed of with your household trash.

The check valve on your Zoey CPAP Sanitizing device needs to be checked regularly for cracks or tears, especially if you use it daily. The valve must be replaced if it is damaged or has completed 120 cleaning cycles. The first step in replacing the check valve is to disconnect the injection tubes from each end. You can dispose of the old valve with your garbage. Ensure that you connect the new check valve correctly by following the tag on the valve. Ensure that the connections are solid.

The Zoey has no screen. In addition to the power button, it has a ‘Delay’ button. When the ‘Delay’ button is pressed once, the cleaning will be delayed for an hour, twice for two hours, and three times for three hours. To relay information, three indicator lights change color. If there are three red lights on, the tubing is not connected properly to the device. A blue light indicates that the device is on. When two blue indicators appear, the device has been generating ozone for twenty minutes. When the device shows three blue lights, the ozone has begun to be converted into safe and breathable air.

All three lights will turn green when the cycle is complete, and it is safe to open the Zoey CPAP Sanitizer. A solid yellow light indicates that the cycle was interrupted, either by opening the lid or by incorrectly connecting the tubing. Indications of three solid yellow mean that it’s time to replace the filter and reset the Zoey. Hold the ‘Power’ and ‘Delay’ buttons for three seconds to reset the Zoey. The Zoey is reset and ready to use when it displays three solid green lights.

Despite its effectiveness, safety features, and ease of use, the Zoey CPAP Sanitizing device falls far short in size and weight. Zoey’s CPAP sanitizing machine is a larger and bulkier cube-shaped assembly that measures 9.25 x 5.50 x 5.25 inches and weighs 2.75 pounds. In this CPAP cleaner comparison, it is the heaviest and most footprint-consuming device. Zoey CPAP Sanitizers also have a smaller sanitization space than other CPAP cleaning machines with larger bags. You probably won’t like the Zoey if you plan to travel with your CPAP cleaner. Since the Zoey CPAP sanitizing machine does not come with a rechargeable battery, you won’t have to worry about forgetting to recharge it. Zoey CPAP Sanitizers have a two-year warranty.

As long as you don’t use a heated tube, the Zoey is compatible with all kinds of CPAP machines. It may be necessary to add an additional adapter if you are using a heated tube with your CPAP. We offer adapters for the Respironics Dreamstation, Resmed Airsense 10, and Resmed S9 at CleanCPAP. Check out Portable Outlet to power your Zoey anywhere, anytime.

Usually, the Zoey costs $319.00. By joining our newsletter, you can get the Zoey for $219 with an additional 10% off when you shop at The Zoey is currently being registered for HSA/FSA eligibility. Check here for more updates and to shop.

There is no amount of information that can replace a product review. You can read reviews from Zoey users (or leave your own) here.

The SoClean CPAP Sanitizer: Automated Efficiency of Ozone

CPAP mask and tubing equipment can be easily sanitized without chemicals using the SoClean 2 CPAP Cleaning Machine. You don’t even have to use water! You will be able to disinfect your CPAP tubing and mask within just 7 minutes. Additionally, the SoClean is lightweight and easy to carry when traveling.

FSA/HSA approved with the listing number 9274

Quick Facts

SoClean CPAP Sanitizer Details

Here are the components of the complete SoClean CPAP Sanitizer kit:

  1. Main SoClean unit
  2. Injection fitting connected with a length of tube attached to SoClean unit
  3. Power adapter
  4. Check-valve assembly connected to the tube
  5. Filter cartridge fitted inside the SoClean unit
  6. Hose slot plug in the SoClean unit
  7. SoClean Neutralizing Pre-wash

As well as destroying 99.99% of harmful microorganisms from your CPAP mask and other components, the SoClean CPAP sanitizing device protects your health from the negative effects of accidental ozone inhalation. SoClean CPAP cleaning machines have a Hose Detect Switch that detects whether the tube is plugged into the hose slot when the lid is closed. The SoClean CPAP cleansing device will not begin disinfection if no hose is detected. In the case of a missing or improperly sealed removable hose slot plug or not having a CPAP mask and hose in the disinfector, the SoClean won’t operate.

You must leave the components in the SoClean’s disinfection chamber for at least 15 minutes after cleaning to allow the ozone to dissipate. Step away from the device for five minutes if you accidentally open the lid while the device is disinfecting, then restart the process to complete the sanitization.

The injection hose comes with a pre-installed check valve. It prevents humidifier water from backing up and entering your SoClean device. The check valve must be replaced immediately if water is found in this tube. If you lose power or the device stops running for any reason, when you restart it remember to reset the sanitization cycle’s time and duration.

Setting up the SoClean CPAP sanitizing device is simple. CPAP machines can be permanently connected to the device. The connection is made in a way that allows the CPAP machine and the SoClean unit to function simultaneously.

Injection fitting installation

The SoClean CPAP sanitizing machine includes an injection fitting that connects your CPAP machine to the CPAP sanitizing device. You must first disconnect your CPAP tube from the humidifier before connecting the SoClean CPAP Sanitizing device. Attach the injection fitting to the CPAP tube port of your humidifier. The smaller injection tube should enter the humidifier tank so that the end of the tubing is over the heat plate. To fit the smaller tube into the humidifier tank without coiling, you might have to trim it in increments until you attain the correct length that fits over the heat plate without coiling. The black plastic fitting of the injection should be firmly seated in the place where your CPAP tube was previously connected. It is possible to remove the smaller injection fitting tube from the injection fitting of your CPAP machine if it does not have a humidifier.

Lastly, connect the injection fitting to the port of your CPAP machine and ensure that it goes all the way in. On the other end of the SoClean injection fitting, attach the CPAP tube. Before you turn on the SoClean CPAP sanitizing device, make sure the black injection tube from the back of the unit is connected to your CPAP machine.

Preparing the time

To get started, power up your SoClean unit in order to set the timer. In order to do this, you need to plug the power adapter into the back of the SoClean unit and then into a wall outlet. Press the clock icon on the glowing screen. As a result, you will be prompted to “Set the current time,” which can be done by using the “+” and “-” buttons until the current time is reached. Come back to the home screen by pressing the clock button once more. SoClean even supports military time formats! When you press the clock button and the ‘+’ button together, you will be prompted to select the time format. You can then add your current time the same way, only in military time.

The SoClean is programmed to run a seven-minute sanitization cycle every morning at ten o’clock. You can change the run-time of each sanitization cycle by pressing the hourglass button. Afterward, you will be asked to choose a run-time (in minutes). This can be done by pushing the ‘+’ and ‘-‘ buttons. A second press of the hourglass button will bring you back to the home page after you change the time setting. The first press brings you to time settings, and the second one brings you back to the home page after you change your settings.

Getting ready

If you have used your CPAP machine for some time, there is a good chance that you have cleaned its components with various cleaning products. There is a risk that they will leave behind odors that can be irritating or even cause allergies. There is a possibility that even a brand-new machine or mask might have an off odor due to residual manufacturing materials. In order to eliminate these odors, SoClean CPAP sanitizing device comes with the SoClean Neutralizing Pre-Wash solution.

Cleaning your CPAP mask and other components with this solution is similar to using soap. In one gallon of water, add a quarter of the supplied solution. Use the SoClean solution to wash your CPAP mask, tube, and humidifier chamber. Following the cleaning process, rinse the components thoroughly with water. The neutralizing solution can also be used to sanitize new CPAP machines before being used for the first time, when hand-washing your mask and other machine components, and even when adding new components.

Cleaning your CPAP mask and hose with the SoClean CPAP Sanitizer

Cleaning your CPAP hose and mask with the SoClean unit is easy once you have set it up. One end of the hose must be connected to the mask, while the other end must be connected to the CPAP machine. The mask should be placed in the SoClean unit. Depending on which side of the machine the SoClean unit is on, remove one of the hose slot plugs. Make sure the hose is properly positioned in the slot. Ensure that the SoClean unit’s lid is closed by snapping it shut. The SoClean CPAP sanitizing device operates according to pre-set time and duration settings. You should leave the hose and mask inside the closed machine for another two hours after the cleaning has finished.

Cleaning your CPAP humidifier tank with SoClean CPAP Sanitizer

With the SoClean CPAP sanitizing device, you can disinfect all the components of your CPAP machine at once, from mask to tube to humidifier. The only thing you need to store all of this is a large box with an airtight lid. Just press the power button once everything is ready.

You can set the run-time for your daily sanitization cycles with the SoClean. Initially, the machine is set to run each cycle for seven minutes. A cleaning session of five to ten minutes is enough for your CPAP machine’s components.

There is no rechargeable battery included with the SoClean CPAP sanitizing device. The device is powered by electricity through a power adapter. In order to turn the SoClean machine on, you must connect the power adapter to the back and plug it into an electrical outlet.

You should replace the check valve and cartridge filter of the SoClean CPAP sanitizing machine every six months for best results. A reminder will appear on the SoClean unit’s screen every six months, depending on how much you use the cleaner. You simply remove the old cartridge filter from its socket inside the machine to replace it. You must remove the outer plastic wrapping and blue tape from the new cartridge filter before fully inserting it into the cartridge filter slot at the back right corner of the disinfecting chamber.

With numerous screen functions to simplify your experience, the SoClean CPAP sanitizing device is highly automated and intuitive. You can set the language, the sanitization time, and the sanitization cycle duration on the screen. Additionally, it displays messages that require action, such as:

1. “Hose not present. Cycle will not run.”

Attempting to use the SoClean unit without the tube or with the tube improperly connected will result in this message. Be sure to tighten both the removable tube slot plug and the CPAP tube before operating the cleaner.

2. “Order Filter Kit.”

The message indicates that your cartridge filter is nearing the end of its useful life. It is important that you add a replacement filter from our shop to your cart as soon as you see this message and check the valve based on your usage.

3. “Disinfection in process. Do not open the lid!”

As soon as the sanitization cycle is complete, the device takes two hours to diffuse ozone from the CPAP components. This message appears when the lid is opened before the disinfection process has finished. It is time to open the cover and use the CPAP components only when the green indicator glows. Upon opening the lid, it turns off. The red light indicates that the SoClean is on and generating ozone, while the yellow light indicates that the 2-hour disinfection cycle is still in progress.

Despite being highly efficient at getting rid of microbes from your CPAP components and highly automated, this device isn’t ideal for traveling. This SoClean CPAP sanitizing device was designed with those who would prefer a permanent CPAP cleaning machine beside their CPAP device in mind. Due to its dimensions of 7.875 x 7.25 x 8.875 inches and weight of 0.58 lbs, it is too bulky and large for travel. You’ll want to shop for a different machine if you plan to take it on the road with you.

It is compatible with the following CPAP machines with adapters available from SoClean: Fisher & Paykel ICON, Fisher & Paykel SleepStyle 600 Series, Philips Respironics DreamStation, Philips PR System One REMstar 60 Series, Philips PR System One REMstar, Philips DreamStation Go, ResMed S9, ResMed AirSense10, ResMed AirMini, as well as all Transcend and Z1 models. You can shop for the adapters from the manufacturer’s website.

If purchased without discounts, a SoClean CPAP sanitizing machine costs $298, making it more expensive than many other sanitizers. If you’re on a budget, you may want to shop around for other products before choosing to add the SoClean to your life.

It is essential to read reviews before making a purchase. The SoClean CPAP sanitizing machine reviews by users are available here if you are interested in learning more about the device. If you’ve used the SoClean, feel free to add your review there as well.

PAP Clean: For the Best Ozone Generator Experience That is Simple, Convenient and Effective

Whether at home or on the go, cleaning your CPAP mask and other equipment can be a difficult and time-consuming hassle. That’s why the PAP Clean Portable CPAP Cleaner System makes it easier than ever to keep your CPAP machine and all related accessories in top shape. Utilizing a controlled stream of ozone to eliminate germs and bacteria, you can now sanitize all parts of your equipment without any water, soap, or chemicals involved. In addition, it’s easy to use with a quiet 35-minute cycle and comes in a convenient, compact size – great for traveling. Make your next CPAP cleaning experience simple and carefree with the help of the PAP Clean Portable CPAP cleaning system!

FSA/HSA approved with the listing number 9274

Quick Facts

PAP Clean Portable CPAP Cleaner Details

The complete PAP Clean kit includes the following components:

  1. PAP Clean device.
  2. PAP Clean dual-purpose sanitizing/travel bag.
  3. PAP Clean charger with cord.
  4. PAP Clean heated tube adapters.

Like other ozone-based CPAP cleaning machines, PAP Clean eliminates 99% of pathogens from your CPAP device. During the cleaning cycle, an activated oxygen-based controlled stream of ozone is used in order to eliminate all microorganisms from the machine; it’s just enough to do its job without any excess. Additionally, at the end of the cycle, the device flushes fresh air through the CPAP supplies to reduce the amount of ozone to be reverted back to room air. So sleep easy knowing that your health and safety are seen as paramount with PAP Clean!

It is easy to set up the PAP Clean. Use your CPAP hose to connect the bag to the device. Add your CPAP components that need sanitizing inside the bag, and once the bag is closed, turn on the power button.

The PAP Clean is designed to make your life easier. With the simple press of a power button, you can activate this fantastic device. Not only is it convenient to use, but it’s also safe and chemical-free – no soap, water, or chemicals needed. Instead, this device uses a specialized dry cleaning process to sanitize your CPAP in just 35 minutes thoroughly.

“STD” Mode: 30 minutes of ozone, 5 minutes air flush, 60 minutes of ozone reverting, then check mark for completed.

“QIK” Mode: 25 minutes of ozone, 10 minutes air flush, 30 minutes of ozone reverting, then check mark for completed.

It is important to note that the supplies should not be removed from the bag until the PAP Clean displays a check mark and unlocked icon.

PAP Clean is equipped with a rechargeable lithium-ion battery. The battery level is displayed on the screen. If the device is low on battery power, it’s an easy fix: simply plug the USB cable into the charging adapter and port located in the device, then plug that into an electrical outlet. When fully charged up, you can get over 6 complete cleaning cycles out of this product.

The PAP Clean CPAP sanitation bag is a superior choice for your sanitizing needs because of its high level of durability. The cleaner bag is reusable and does not require to be routinely replaced, saving you both time and money. To further benefit from the convenience of the PAP Clean bag, it cleans itself from the inside during the sanitization process, providing a little extra peace of mind as you go through sanitizing cycles for your CPAP components.

The convenience factor of the PAP Clean CPAP Cleaner is great, as the small rectangular screen displays information that keeps you informed of your device’s progress. Not only can you see how much longer the cleaning cycle will take, but also check the battery level, so you don’t run out of power. You can easily toggle between its dual cleaning modes by pressing a single button on the device itself. With clear timer countdowns and a red lock icon when cleaning, and a green unlock icon when complete, there’s no worry about not knowing when your PAP Clean has finished its job.

The PAP Clean device is unique in its convenience and design. With a compact rectangular shape, it fits snugly into any luggage, making it ideal for travel. An amazing feature of this device is the sanitizing bag is large enough to hold two CPAP tubes, two CPAP Masks, and two CPAP humidifier tubs at the same time making it perfect for couples that both use CPAP therapy. This allows you to sanitize multiple components at the same time, cutting down on time and effort if you prefer to sanitize them every day. The tube guard strap prevents O3 leaks while you’re traveling as well, so you have no worries that your device won’t function as it should. To top off its impressive features, the PAP Clean CPAP Cleaner works with a rechargeable lithium-ion battery. It includes a 2-year warranty against ozone generator defects—and all other accessories come with a 90-day warranty. Best of all, the process is quick and easy for any situation or trip!

The PAP Clean CPAP cleaning machine is universally designed. CPAP machines of all types are compatible with it. Any CPAP mask, water chamber, or tube can be cleaned with it. This makes it easy to add to your sleep therapy routine.

If you are looking for a cost-effective and convenient way to disinfect your CPAP mask and other CPAP equipment, the PAP Clean CPAP Cleaner is one of the best options available. It packs some great features at an affordable regular price of $219.00. When you register at, you can shop with an additional 10% discount in addition to any other sales going on in our shop. [link to subscribe] This device is a non-prescription CPAP disinfector that isn’t typically covered by traditional commercial medical insurance – though it is eligible for HSA/FSA payment options, making it even more budget-friendly.

The Sleep8 Sanitizer:
The Best in Ozone CPAP Cleaning

In the CPAP cleaning market, the Sleep8 ozone CPAP Sanitizer leads the field and is our top pick for the best 03 device. Your CPAP, BiPAP, or APAP will be sanitized with the Sleep8 activated oxygen generator, which emits ozone to sterilize everything inside the replaceable cleaning bag. The universal port on the bag can be plugged into your PAP device’s hose by simply unplugging it. Heaters, electric diagnostic hoses, and standard PAP hoses can be used with the port without additional adapters. Keep reading to learn why we picked the Sleep8 as the best choice among 03 based products.

FSA/HSA approved with the listing number 9274

Quick Facts

Sleep8 CPAP Sanitizer Details

Here are the components of the Sleep8 CPAP cleaner kit:

  1. Sleep8 device
  2. Sleep8 bag
  3. Sleep8 charger

You get a free gift when you order your Sleep8 CPAP cleaner kit from the shop at! A Sleep8 CPAP will ship with one hard-case travel/storage bag designed for storing your CPAP cleaner, accessories, and the case itself, all within its 8′′ x 7′′ x 3′′ size. Keep reading to learn what makes the Sleep8 the best activated oxygen cleaner.

The Sleep8 destroys 99% of the bacteria, mold, and viruses in your CPAP effectively and silently. The sanitization bag with built-in charcoal filter converts activated oxygen from the sanitization bag into oxygen before venting into the room to protect users from ozone exposure. When using the Sleep8 CPAP cleaning device daily, you should replace the filter bag every three months for best results.

CPAP tubing can also be connected to the device on the Sleep8 by using airtight valves on the sanitizing bag and the device. A flapper valve also ensures that the ozone stays within the disinfecting bag. This creates a sealed circulation loop that prevents activated oxygen from escaping. As breathing in the activated oxygen can cause a number of respiratory side effects, the Sleep8 setup must not be disturbed until one hour after the sanitization process has been completed. As an added safety feature, when the components are not securely attached, an integrated shut-off mechanism prevents the unit from operating.

There are only a few requirements for setting up the Sleep8. During the sanitizing process, all you need to begin cleaning are the sanitization bag, the device, and the components. After placing the components in the bag, connecting the CPAP hose to the white port inside the sanitizing bag, and pressing the power button, you’re ready to begin cleaning.

Using the Sleep8 is very simple. CPAP machine mask and other components need to be removed from the machine so you can wipe them down. Clean your mask and CPAP machine’s humidifier after emptying the water chamber by wiping them with specialty products like CPAP wipes or a soft cloth. By doing this, dirt and debris will be removed from these surfaces.

You will find a circular valve atop the Sleep8 bag when you open it. In the Sleep8 sanitizing bag, place all the components you’ve just wiped clean, then zip it shut to make sure it’s airtight.

To connect the Sleep8 device, attach the triangle-shaped valve with a blue alignment dot on the exterior of the sanitization bag. Sanitization cannot begin unless the connection is tight. Start the sanitizing process by pressing the blue power button on the Sleep8 device. When the device is switched on, it will beep and the screen will illuminate. Upon completion of the sanitizing cycle, the device will beep five times, and display an OK message on the screen. The device will then automatically shut down to conserve power.

CPAP components are sanitized for one hour by the Sleep8, and then the timer will add a new 75-minute period afterward. During the additional 75 minutes, the ozone in the Sleep8 Sanitizing bag will convert back to oxygen for an hour, and the remaining 15 minutes will be used to flush fresh air through the CPAP supplies to eliminate any remaining activated oxygen. After that, you can safely remove your CPAP mask and other components.

Sleep8 should always be fully charged before use, since a sudden shut-down during the cleaning process may result in improper sanitation of your CPAP mask and components. If the device is charging, you can use it. However, you do not have to keep it charging while using it. Sleep8 can be charged using the USB cable and adapter included in the kit. The Sleep8 CPAP cleaner unit takes about one and a half hours to charge fully. The battery life indicator on the screen indicates how much power is left. In the event that the battery indicator indicates that the battery is low, you should charge it before using it.

You should replace the affordable Sleep8 bag every three months if you use it every day. A built-in filter comes with the bag, so it isn’t necessary to replace it separately. A dry cloth should be used to wipe off the bag in case it becomes soiled. Your CPAP bag cleans itself from the inside during the sanitizing cycles for your CPAP mask and other components, so you don’t have to worry about sanitizing it. Keeping the Sleep8 sanitization bag dry is important, so it is not recommended to wash it.

Your Sleep8 device has a small, circular, illuminated screen. The Sleep8 screen displays different types of indicators for tracking and controlling the device’s functionality and charge of the battery. An indicator of battery life, a timer for the remaining cycle time, a fan icon to show cleaning is underway, and an 03 icon to show the Sleep8 is properly connected to the bag are all displayed on the screen.

There is no doubt that the Sleep8 CPAP cleaning device is the best in the category of portability. With a size of 5.25 x 3.25 x 2.25 inches, it can easily fit in the palm of your hand. Just over half a pound in weight, the Sleep8 is also lightweight. A stylish asymmetrical-8 or lopsided-infinity shape makes it easy to slip into a small handbag or even the side pocket of your backpack. All the components of your CPAP can be sanitized together thanks to its large, flexible, foldable sanitizing bag. A rechargeable lithium-ion battery powers the Sleep8 CPAP cleaner, which comes with a 24-month warranty for the device, 12 months for the charger, and three months for the sanitization bag.

The Sleep8 is also compatible with the Portable Outlet, allowing you to take it almost anywhere, regardless of available power sources. 

With its many features, the Sleep8 CPAP cleaner is one of the best and most versatile products on the market. It works with all types of CPAP equipment, including masks, heated or non-heated tubing, headgear, and humidifier chambers. There are no special adapters or connectors required. Whether you use an APAP, BiPAP, or CPAP, the Sleep8 is perfect for you. Shop now to add the Sleep8 to your life today.

Sleep8 normally costs $319.00. Subscribe to updates to save an additional 10% off the reduced price of $229 at the shop. This means you’ll get the best price on the net.

A Sleep8 device can also be claimed as an HSA/FSA expense.

Consumers who want to make the best decision will seek out reviews from other users before they shop. Check out customer reviews on Sleep8 here. Do you already use this device? It would be great if you could leave a review of your own to help others.

UV-C CPAP Cleaners

UV-C Light: Safe and Chemical-Free Sanitization

Some sleep apnea patients prefer UV light over activated oxygen. These CPAP cleaninng machines use UV light technology:

 For a complete analysis, continue reading.

The Liviliti Paptizer Smart CPAP Sanitizer Review: Best UV-Based CPAP Cleaner

With the LiViliti Paptizer UVC LED Smart CPAP Sanitizer, sleep apnea patients can easily and efficiently disinfect your CPAP machine. A UV-C light and heater are integrated into this device, making it the first of its kind to provide thorough sanitization. For those who want a fresh and sanitized sleeping environment, this machine also helps reduce unwanted odors.

FSA/HSA approved with the listing number 9274

Quick Facts

Liviliti Paptizer Smart CPAP Sanitizer Details

Components of the Liviliti Paptizer Smart CPAP Sanitizer kit include:

  1. PAPTIZER Smart CPAP Sanitizer
  2. Power Adaptor
  3. Stainless steel rack

The Liviliti Paptizer Smart CPAP sanitizing machine, like the Zoey and the Lumin, uses a box-like setup with a lid to house the CPAP mask and other equipment to be cleaned. The lid is controlled by a button on the front of the device. Sunlight emits UV-C radiation that is harmful to living organisms, just like activated oxygen gas. The wavelength of UV-C is between 200 and 290 nanometers. Fortunately, the majority of UV light reaching the earth from the Sun is absorbed by the atmosphere. The UV-C lightwaves produced by the Paptizer Smart CPAP Sanitizing device have a wavelength between 260 and 280 nanometers, which effectively destroys 99% of bacteria, viruses, and mold.

The device does not use ozone gas, so there is no risk of leakage. In this CPAP cleaner comparison, the Liviliti Paptizer Smart CPAP Sanitizing device receives great reviews for getting rid of 99% of bacteria on CPAP equipment within 3 minutes. However, when it comes to security, the Paptizer Smart CPAP Sanitizer is a standout in this comparison of CPAP cleaners. The device has an automatic security feature that protects users from accidental exposure to UV-C lightwaves. In operation, UV-C LEDs shut off when the lid is opened, so the user is never exposed to UV-C. Furthermore, the device automatically shuts off after disinfection is complete, adding another layer of security and protecting the user from UV-C exposure. For all these reasons, the Liviliti Paptizer is clearly the best among the UV-light products.

Its ease of use is one of the biggest advantages of the Liviliti Paptizer for sleep apnea patients using CPAP therapy. Because of its single-touch operation, the Paptizer is very easy to set up and use. To use the device, simply plug the power adaptor into the machine on the back. Connect the other end of the adaptor to an electrical outlet nearby. The lid of the device can be opened by pressing the OPEN button. The stainless steel rack should be placed inside the device first. In order to maximize UV exposure and sanitation, place your CPAP mask on the rack with its insides facing up. When you are finished, close the lid and turn on the Paptizer by pressing the ON/OFF button. On the device, you’ll see that all four buttons are illuminated. You can choose between three different working modes. After selecting which one you want, simply press the button for it to begin the disinfection process.

The Paptizer is simple to use, and there are only three modes to choose from. After placing the CPAP components inside the Liviliti Paptizer, you can choose between three modes of sanitization:

1. Three-minute Quick Disinfection

If you need to sanitize something quickly, this mode is ideal. Start the process by pressing the button with the illuminated sun symbol. The disinfection process will take three minutes. Upon completion of the disinfection process, the device will make a double beep sound. After the process is complete, you can remove the sanitized objects from the device and use them.

2. Auto Mode (with Drying and Sterile Storage)

This mode is ideal for drying wet CPAP equipment that you want to keep sterile until you use it next time. With Auto Mode, UV radiation and heat are used to sterilize and dry the device in a temperature-controlled manner. It is possible for the power cube to become warm while in Auto Mode. To start the Auto Mode disinfection process, press the button with the fan-shaped icon. Three steps are involved in the process. After the three-minute quick disinfection cycle, the device is dried for 60 minutes and then stored in sterile conditions until the next usage.

If you wash your CPAP components by hand, this mode is perfect. Dry, disinfect, and keep them sterile until your next use so that you can use them with confidence. CPAP equipment doesn’t have to interfere with your day; you simply push the buttons to get started. During this process, you must keep the power adaptor plugged in. It is not recommended to use Auto Mode to disinfect devices with batteries.

3. For three-minute Quick Disinfection and Sterile Storage

It is likely that you will use this mode most often if you don’t wash your CPAP equipment every day. You can use this mode to disinfect your CPAP equipment in three minutes and keep it sterile until your next use. The process begins with pressing the button with a box on it, and you must keep the power adaptor plugged in throughout.

The Paptizer Smart CPAP sanitizing machine uses UV LEDs to eliminate 99.9% of germs in three minutes. The disinfected item can be used after the process is complete. In terms of CPAP cleaning machine comparison, this is the shortest time any device on the list takes to disinfect. If you need speed when it comes to cleaning your CPAP components, you’ll want to add the Liviliti Paptizer to your short list when you shop.

After washing your CPAP components or any other object you wish to sanitize, you will want to use the Auto Mode, which provides three-minute quick sanitization and then a 60-minute drying cycle.

Featuring 40 UVC LEDs to sanitize and deodorize items, the Liviliti Paptizer is an industry-leading product. With constant temperature control, the device provides five-sided multidirectional sanitization. The items inside can be dried within sixty minutes after washing, and it comes with a storage option as well. This unit provides high levels of sterilization and dryness by using UV light, heat, and circulated air. The Paptizer Smart Sanitizing device features an extremely simple drop-close-press disinfection method, making it hassle-free, and highly effective in the extermination of 99.9% of germs. There are security features included that ensure the user’s safety at all times. With the Paptizer, you can store your equipment in a sterile environment for up to 24 hours. It is made of platinum LEDs that will last over ten thousand hours.

The Paptizer Smart CPAP sanitizing machine does not require charging. It is necessary to connect the power adapter that comes with the device to an outlet on the back of the device and to a regular working electrical outlet on the other end. In order to maintain sterility during disinfection, drying, and storage, the adaptor must be plugged in at all times.

The Liviliti Paptizer is 100% ozone-free. By using UV-C light as a disinfectant, the CPAP machine’s equipment, mask, and other personal items can be disinfected. Therefore, no filters are required during the sanitization process since there are no harmful gases to be controlled. In addition to filters, the Paptizer Smart CPAP sanitizing device requires no replacement parts.

Press the ON/OFF button after plugging the Liviliti Paptizer into an electrical outlet to turn it on. The small LED screen will light up. In a functioning device, the LED screen displays ‘000’, and all indicator lights are bright and high. During a three-minute quick disinfection, the LED screen shows the time until 180 seconds have passed. When this process is in progress, the fast sterilize and ON/OFF indicators are on, and the other two are off. By selecting the Auto Mode, the device sterilizes and deodorizes objects, then smartly dries with temperature control, and then keeps them in sterile storage. On this cycle, only the ON/OFF and Auto Mode indicators are on, while the other two are off. During the three-minute quick disinfection and sterile storage mode, the ON/OFF indicator, the fast sterilize indicator, and the sterile storage indicator are high and bright. During this process and in Auto Mode, the LED screen indicates the timing with a revolving indicator for 180 seconds.

In terms of weight and size, the Liviliti Paptizer does not score well in the CPAP cleaner comparison. The weight of the device is 4.29 lbs. In spite of being on the heavy side of this comparison list of CPAP cleaners, the Paptizer is not the heaviest unit of all the products on our list. The device is cube-shaped with dimensions of 11.89 x 10.59 x 6.06 inches, which makes it appear bulky, but the compact shape and handle on the top make it extremely easy to travel with, just like a vanity case or an icebox. Additionally, the ability to sanitize more than just CPAP equipment makes up for the device’s size. In spite of its size, it can easily fit in with the rest of your luggage, making it an excellent travel companion.

There is no significant setup or preparation required for the Paptizer Smart CPAP Sanitizing device device. Through its single-touch operation, the user can easily sanitize their CPAP equipment and personal items such as keys, breast pumps, pacifiers, glasses, car keys, baby bottles, cell phones, toothbrushes, and more. This Paptizer Smart CPAP sanitizing device provides medical-grade sanitization to anything it can fit. As a result of its versatility, the Paptizer Smart CPAP cleaning device earns top marks in this CPAP cleaner comparison for being the best all-purpose sanitizing device.

Its versatility and portability make the Paptizer Smart CPAP Sanitizer one of the most economical products in this CPAP cleaner comparison. Paptizer Smart CPAP Sanitizing device sells for $249 on the market. The shop offers it (often on sale for the best price) with an additional 10% off using a discount code you’ll get when you join our newsletter. That’s over and above any sale price, giving you the best deal online. A new Paptizer can’t be found anywhere else at a better price, so you can shop with confidence at

Reviewers have shared their personal experiences with Liviliti Paptizer Smart CPAP cleaning machines. You can make a more informed decision by reading these product reviews. In addition, if you are already a user of the Liviliti Paptizer Smart CPAP sanitizing device, you can even leave your review as well.

The Lumin CPAP Sanitizer Review: UV-C Light Safety and Efficiency

An easy-to-use and reliable CPAP cleaner, the Lumin UV cleaning device is a good solution for sleep apnea patients to shop for. Featuring one-touch operation and automatic shutoff, this innovative product makes cleaning quick and convenient. To ensure that your mask and other items are disinfected and safe for use, the Lumin chimes and lights up once it’s done.

FSA/HSA approved with the listing number 9274

Quick Facts

Lumin CPAP Sanitizer Details

These components are included in the Lumin kit:

  1. Lumin device
  2. Lumin LED bulb
  3. CPAP mask wipes
  4. Quick start guide
  5. User manual

In the same manner as the Zoey, the Lumin has a drawer for sanitizing instead of a bag. Lumin’s UV-C light technology kills 99% of bacteria, viruses, and mold, same as activated oxygen cleaners. When compared to O3, some sleep apnea patients consider UV light as a safer option. Regardless of whether you are exposed to UV light, once the exposure is over, your health is not at risk. These CPAP cleaning machines have a safety feature in the drawer to prevent any harm to users. As soon as the drawer is opened while the machine is running, the automatic feature cuts off the UV light, limiting exposure.

The Lumin CPAP sanitizing machine is very easy to set up for cleaning your mask and other CPAP components, making it easy to add to your life. Let’s look at the different components and attachments that come with this device.

First, remove the drawer from the device completely when you receive it. Inside the drawer, there is a reflective surface that ensures 360° coverage for your CPAP mask and accessories. Your CPAP accessories will be stored in the rack inside the drawer. Take it out of the plastic and add it back in the drawer. It is now time to insert the UV bulb. Take the bulb out of its packaging. At one end of the bulb, there are two metal prongs. You must align it with the socket on the inside of the Lumin CPAP sanitizing device before you can place it in it. If you place the bulb correctly, you will hear a click.

As soon as the bulb is in place, replace the drawer, and you are ready to start using the Lumin CPAP cleaning device. Connect it to an electrical outlet and turn it on when you’re ready. Once the initial setup is complete, each subsequent use doesn’t require any additional effort.

There are no complicated steps involved in using the Lumin. Additionally, the Lumin can be used for sanitizing more than just CPAP equipment. Any non-living object that fits inside the Lumin’s sanitization tray can be sterilized using the Lumin. Hospitals commonly use it to sterilize medical equipment, dentures, toothbrushes, etc. This feature earns this device bonus points in our CPAP cleaning device comparison, but overall the Livility Paptizer offers more features and a faster sanitization cycle which is why the Paptizer is still best in show for UV technology products.

However, UV technology also kills only living organisms, similar to activated oxygen technology. Before sanitizing your CPAP mask and other equipment with the Lumin CPAP sanitizing device, wipe it with CPAP wipes (available from our shop) or a soft cloth to remove other non-living dirt and debris. This step is a requirement for all CPAP cleaning machines.

In this CPAP cleaning device comparison, the Lumin CPAP sanitizing device is the easiest to use. In order to sanitize an item, simply place it in the sanitization tray, close it, and press the power button. Upon completion of the cleaning cycle, the device will beep to indicate that the item is disinfected and ready for use. You can sanitize your tubing by running a cleaning cycle, turning over the tubing, and running it again.

Within five minutes, the UV light in the Lumin CPAP sanitizing device eliminates 99.9% of germs from the CPAP mask or tubing. Upon completion, the item is disinfected, safe to remove, and ready to use. Following the cleaning, there is no waiting period. With this speed, this device is the second fastest device on this CPAP comparison analysis.

Due to the absence of gas-controlling requirements during and after the sanitization process, the Lumin CPAP sanitizing device does not require filters. As a matter of fact, there are no replacement parts needed for this CPAP sanitizing device at all. For sleep apnea patients actively using CPAP therapy, the Lumin CPAP sanitizing device could save you more money in the long run than any O3-based unit.

There is no screen on this device. A green ‘Ready’ indicator appears on the device when you plug it into an electrical outlet, and a blue On/Off button appears. A red ‘In-Cycle’ indicator will appear when you push the ‘On/Off’ button. Upon completion of the cycle, the ‘In-Cycle’ indicator will turn off and the ‘Ready’ cycle will return to green. As a result, you can remove your CPAP mask and other equipment safely.

The Lumin CPAP Sanitizing device weighs 5.5 lbs. As a result, it’s the heaviest CPAP cleaning machine on this comparison. It measures 12.25 x 8.5 x 7.75 inches in size and is cube-shaped. As far as freedom of movement is concerned, this device loses a lot of points in our CPAP cleaning device comparison. There are limitations to its portability due to its size and weight.

This device is the perfect fit for some CPAP users who don’t travel much and prefer UV technology to activated oxygen. Many customers looking for CPAP cleaning machines also find it appealing that it can sanitize dentures, toothbrushes, etc. So consider all the factors before you shop for your new device and add the one that fits your life best.

As a versatile device, the Lumin CPAP sanitizing device is one of the best on the market. Due to the fact that it is not required for any tubing connections to be made, it can be used to sanitize any component that can fit inside the sanitization tray without any issues – not just a CPAP mask or other CPAP components.

This Lumin CPAP sanitizing device normally sells for $319. This is an FSA/HSA-approved machine.

Lumin users have shared their experiences through product reviews. Find out what they think of this device here. We’d love to hear what you think if you’ve already used it.

Other UV Devices

The Lumin Wand Review: UV Sanitizer for All Surfaces

An all-around surface disinfectant that’s portable and fast: the Lumin Wand available from the shop is exactly what every home, office, or business needs right now. With a sleek design and outstanding efficiency in killing microbes, the Wand could be just what you need to add to your life today!

People will inevitably touch certain surfaces more often than others in any building, whether it be a residence or not. There are numerous locations where this can occur, including doorknobs, buttons, stairway railings, and toilet flush handles. Surfaces like these are hotspots for microbial transmission. The solution to this problem lies in a UV-powered surface cleaning device that is 99.9% effective against a wide range of microorganisms that are harmful to humans.

Quick Facts

Lumin Wand Details

Components of the Lumin Wand include:

  1. Proximity Sensor and Accelerometer,
  2. High Powered UVC Bulb, and
  3. Adapter.

With Lumin UV Sanitizing Wand, you can sterilize surfaces with UV-C rays at 254 nm wavelength. It is capable of decimating up to 99.9% of tested microbes within just five seconds. In contrast to weakly powered and low output machines, the Wand is lab tested to destroy over 99.9% of E. coli, Staph, Listeria, Salmonella, H1N1 and Human Coronavirus on hard non-porous surfaces.

A variety of safety features have been built into the device. With three advanced safety features, a child is protected from accidentally activating the device by holding the On/Off button for three seconds. A proximity sensor turns off the LEDs if the device is raised higher than 6″ from the surface it is focused on, and a sensor that detects if the user turns their wrist to prevent them from looking at the LEDs directly.

The Wand does not have to be set up in any way. As soon as your device is fully charged, you will be able to use it immediately.

Make sure your Wand is fully charged before using it. It may take up to two hours to charge once plugged in. Keep pressing the ON/OFF button until the device beeps and the indicator turns orange. Upon reaching full strength, the UV LEDs beep again and the indicator changes to BLUE. Move the Wand across the surface to be treated for about 5 seconds in each area while holding it 0.5 inches above the surface. Push the ON/OFF button to turn off the Wand. The Wand will shut off automatically within 5 minutes if left on a surface.

In about five seconds, the Wand thoroughly cleans each area and rids it of microorganisms. Within seconds, the device disinfects the surface it is aimed at without requiring any tedious wrist movements or patience.

To destroy microbes, the Wand uses UVC radiation. An ultraviolet C ray is a narrow spectrum of ultraviolet light. It is invisible to the naked eye. By destroying microbial DNA and RNA bonds at 254 nm, UV-C is highly effective at sanitizing surfaces.

A power adapter that comes with the Wand can be used to charge the device’s 18650 lithium-ion battery. Approximately two hours are required to charge it completely.

Maintaining and using the Wand is easy. Make sure it is fully charged. Be sure to keep it away from water. Simply apply a gentle cleanser and run over it with a soft cloth if you wish to wipe it down.

With a sleek design and a comfortable grip, the Wand is easy to handle. A little over one foot long (13.2 inches), the Wand weighs approximately 1.3 lbs. It fits your lifestyle perfectly, so make sure to check out deals for the Wand when you shop for CPAP products.

The Wand is a very portable device that can sanitize any surface thanks to its compact shape, small size, and lightweight design. It is possible to disinfect a surface just by focusing the Wand on it. It is easy and swift to sanitize door knobs, phone screens, bags, books, tabletops, and any other surface in your home, car, or workplace without requiring water.

Lumin Wands normally cost $219, but you can get them for $169 when you shop here at You can get an additional 10% discount by using the discount code you’ll get when you sign up for the shop newsletter. Be sure to add the Wand to your cart while you shop for your new CPAP cleaner and get the best price on the net!

Impacts of Sleep Apnea: Why is good sleep important?

A good night’s sleep is crucial for good health, but you may be experiencing poor sleep because of sleep apnea without even being aware of it. The diagnosis of sleep apnea can be difficult to hear, but when you add CPAP treatment to your life, it makes it much easier to manage. By eliminating any pauses in your breathing during sleep, CPAP machines (such as the Resvent iBreeze) significantly improve your sleep quality and lengthen your average sleep time. Your energy levels will stay high throughout the day if you make it a policy to get good sleep using CPAP therapy. Say goodbye to lethargy and groggy midday naps with a CPAP machine.

Sleep apnea can lead to sleep loss, fatigue, and irritability throughout the day. If you feel that you aren’t getting enough sleep or that you are slow, fatigued, or irritable throughout the day, you may have sleep apnea. (To learn more, take our sleep apnea quiz.)

Long-term sleep deprivation can result in negative health consequences. It’s been proven that sleeping too little or not getting enough quality sleep makes people more likely to get sick after being exposed to a common cold virus. Frequent illness is common among people who suffer from sleep apnea who aren’t yet using CPAP therapy to improve their sleep.

As you sleep, your immune system releases proteins called cytokines, some of which stimulate sleep. Infections, inflammation, and excessive stress all trigger an elevation in these cytokines when your body is under duress or your immune system is challenged. Sleep deprivation may lead to your immune system not producing these protective cytokines. Due to this, your body is less able to defend against infections when you are sleep deprived.

In addition to strengthening your immune system against infectious diseases, proper sleep also helps prevent lifestyle diseases such as diabetes, obesity, heart disease, etc. A healthy immune system requires seven to eight hours of sleep, but different age groups require varying amounts of sleep to function optimally. Teenagers generally have to have nine to ten hours of sleep daily, while children aged six to fifteen require up to 12 hours of sleep. A lack of quality sleep and waking up repeatedly in a single night due to sleep apnea can have a detrimental effect on your health, regardless of the number of hours you remain in bed.

When you add CPAP therapy to your sleep routine, you’ll want to make sure that your mask fits properly. An ill-fitting mask will degrade therapy, hindering your quest for better sleep. Your doctor can help make sure you know how to use your mask properly. And of course, make sure to keep that mask properly sanitized! Your mask should be replaced regularly, and you can shop for a new or replacement CPAP mask at

By improving sleep quality, CPAP machines offer immediate and long-term benefits to sleep apnea patients. CPAP machines ensure your machine is efficiently and conveniently cleaned, so sleep apnea no longer disrupts your life. You’ll find all the best products you need to keep your CPAP machine sanitized and healthy when you shop at

The Quick CPAP Cleaner Comparison Chart

Our goal at is to help sleep apnea patients make informed health decisions. Regularly used CPAP machines must be maintained consistently for users to get the best sleep possible. Sanitizing your CPAP machine regularly and efficiently is not an easy task if you don’t have an automatic cleaning device. The following table includes all the relevant data from our comparison so that you can compare the information side by side as you shop:

ZoeyVirtuClean 2.0Sleep8Purify 03Purify 03 EliteSoCleanPAP CleanNUWAVELumin CPAP CleanerLumin WandPaptizer
Size9.25 x 5.50 x 5.25 in4.5 x 1.7 in5.25x3.5x2.125 in4.5 x 2.75 x 2.12 in5.75x2.5x1.5 in7.875 x 7.25 x 8.875 in4.5x2.5x1.754.87x2.37x212.25 x 8.5 x 7.7513.2 x 2 x 1.7511.89 x 10.59 x 6.06
Weight2.75 lb0.48 lb0.58 lb0.5 lb.49 lb5.6 lb8 ounces0.45 lbs5.5 lb1.3 lb4.29 lb
ShapeCuboidCircularUnsymmetrical infinity or 8CuboidCuboidCuboidCuboidCuboidCuboidRod-likeCuboid
Battery-Rechargeable Lithium-ionRechargeable Lithium-ionRechargeable Lithium-ionRechargeable Lithium-ionNo batteryRechargeable Lithium-ionRechargeable Lithium-ionNo batteryRechargeable Lithium-ionNo battery
Electrical specifications12v DC, 1A AC Adapter (110-240V AC 50/60 Hz, 0.5A)2000 mAh, 4W2600 mAh, 5W2000 mAh, 4W2000 mAh, 3.7WAC 100~240V, 50/60HZ, 0.5A2600 mAH, 110V2600 mAH, 3.7V110 VAC (60 Hz) - 220 VAC (50 Hz)AC100-240V, 50-60HZ, 0.8A18V DC, 1.5 AC Adapter (110-240V AC)
Warranty24 months24 months24 months (device), 12 months (charger), 3 months (bag)24 months24 months24 months2 Years on ozone generator2 Years24 months24 months24 months
Bag or sanitization space sizeMediumLargeLargeSmallLargeSmallLargeSmall+LargeMediumSmallMedium
Time taken to clean20 mins35 mins1 hour35 mins35 min7 mins35 minutes35 minutes5 mins5 seconds3 mins
Waiting time after cleaning1 hour 40 mins45 mins1 hour90 mins90 mins1 hour 20 mins1 hour2 hourNo waitNo waitNo wait
Ozone filterYesYesYesNoNoYesNoYesNoNoNo
Filter replacementFour monthsSix monthsThree monthsNoNoSix monthsNo6 monthsNoNoNo
Ozone residueYesYesYesYesYesNoYesYesNoNoNo
Automatic shut down after cleaningYesYesYesYesYesYesYesYesYesNot requiredYes
Safety shut-off when not connected properlyYesNoYesNoNoYesNo NoYesYesYes

In order to prevent sleep apnea side effects, it is crucial to keep CPAP machine mask and parts sanitized. It is easier to do this job with automatic cleaning machines, and they can be more effective than hand-washing. We hope this comprehensive review made your CPAP cleaning machine search easier with all the correct information in one place. Let’s all sleep well and be healthy!

Scroll to Top